Expromizer V4 from ExVape, an MTL atomizer for a pure concentrate of flavors!
Update on September 27 2019
Do not buy the Expromizer V4 in Gun Metal and Polished. I received an Expromizer V4 in Black (Gun Metal) and the atomizer is completely defective. Can not open the bottom of the atomizer to access the deck. I tried everything, put liquid in the joints, put it in the fridge for 30 minutes.
Finally, I had to buy big plier to be able to open it. The lower part was damaged, because I had to force to death to unscrew this shit. I am not the only one to have encountered this problem. After some research, there are some sites that have removed the Black and Brossed version because of this problem. And this is not the only fault. The ring of the airflow is completely useless. It tends to come when one opens the filling of the liquid and then, impossible to turn it.
I already had an Expromizer V4, but it is in Brossed version. And we do not know how many copies are affected by these problems. But in the current state, do not buy the Gun Metal and Polished versions and if you buy the Brossed version, make sure that the site where you buy it has a return policy. It is catastrophic that Exape, a German brand, could have left such a lack of quality control!
The Expromizer V4 from ExVape want to reign on the MTL realm. I had trouble finding my vaping style. I tested all kinds of atomizers and I can say that I go more and more on MTL. The indirect vaping is also one of the trends for 2019, as there are quite a few manufacturers launching MTL atomizers and I rushed to see the Expromizer V4 from ExVape.
Flavor and nothing else
Exvape is a German brand, so we will have a very neat and strong enough finish. Specializing in flavor-oriented atomizers, he had already delighted us with the Exvape Expromizer V3 with an airflow that was later “borrowed” by manufacturers from distant countries. One of my favorite atomizers is the Siren 2 from Digiflavor, but I think the Expromizer V4 from ExVape can dethrone it at ease.
It is small enough with a diameter of 23 millimeters and it is in Single Coil, a panacea for beginners. The good idea of the Expromizer V4 from Exvape is that the airflow and filling are done from the top. This is a problem with the Siren 2 which has its AirFlow at the bottom. Why ? Just keep in mind that an Airflow at the bottom will cause leaks. I do not really have this problem with my Siren 2, but it is almost a feature/bug for all atos with an bottom airflow.
An irreproachable finish for the Expromizer V4
The alloy of the Exvape Expromizer V4 is stainless steel and rather than offer different colors, they offered different types of steel such as brushed, smooth, etc. A strange choice, but that gives a nice look to this atomizer that is designed for the MTL.
Germans respect the manual to the letter, because we have a big bad point with the Exvape Expromizer V4 which is its capacity of 2 ml. I first thought it was in appearance and that there is a bubble glass of 4 or 5 ml provided with the pack, but it seems no. Maybe they are planning to propose an extension later. But propose an atomizer RTA, even indirect vape, with only a capacity of 2ml in 2019, well, it’s a big bad point.
How is the vaping with Expromizer V4?
The Expromizer V4 from ExVape uses a bottom-up Airflow directly under the deck and the liquid inlets touches the cotton giving you exceptional flavor. I thought the Siren 2 was excellent in flavor and it is (but it depends on liquids).
And Exvape don’t joke when he says that his Expromizer V4 is pure MTL. However, the adjustment of the Airflow is fairly standard and therefore, we have a tight vape, but not too much. On the Siren 2, you have a very sharp setting and a draw that is as tight as … you put what you want at the end of the sentence.
The flavors are very present, but above all, they are much more detailed. For example, I vape the Cubano Vgod (very loaded with aroma up to 30 %) and well, on a conventional MTL atomizer, you have the flavor in the mouth, but you have the entire package.
On the Expromizer V4, you have a decortication of flavors that is very interesting. However, it is strange because I found it bland with some types of liquid. I thought that being an MTL, only custard-like liquids would pass the best. But in fact, even on some light liquids, but also some more charged, Expromizer V4 did not express itself well. Maybe it comes from my cotton or my coil.
Expromizer V4 is almost perfect
The available colors of the Expromizer V4 are: Polished, Brushed and Black. With Expromizer V4, the German brand Exvape offers us a very good MTL atomizer with a real explosion of flavors.
The Expromizer V3 had become legendary and had allowed German brands to find a neat place in the world of MTL atomizers. We have German quality at all levels. We feel a robustness and a finish that is not usually found on other atomizers, even European.
So, if you’re a fan of the indirect vape and are looking for a good atomizer to add to your collection, the Exvape Expromizer V4 would be a trophy of choice. After, would I recommend for a novice in RTA, oriented MTL? Well, not really, because despite the size of the deck, the setup of the coil, but especially, the wicking can get you in troubles.
But this remains a safe bet in the world of MTL atomizers. We can tick a little on the price, because the Expromizer V4 turns from 50 to 60 dollars. It’s really expensive for an RTA atomizer, even “flavor-oriented”. The Mesmerize 2 which is equally powerful costs around 40 euros … After, I do not know if it is made in Germany and if it is, then it can explain the price. And this proves above all that the MTL is back in force and that’s what matters most.
Where to find the Expromizer V4?
- On Heaven Gifts (from 45 to 65 dollars)
- On Vape Sourcing (from 45 to 55 dollars)
- On FastTech (around 44,90 dollars)